Your Microphone is not working

The microphone or audio device you are using is not working correctly. Make sure the audio device is plugged in correctly and also check the volume settings on the device. If there is physical damage to the device or if the problem persists after restarting your computer, try using a different device.

Also, make sure the device you are using is optimized for Microsoft Lync Online communications software. For a list of optimized devices, see Phones and Devices Qualified for Microsoft Lync.

Before making or receiving another call, check that the microphone is working, and check the audio quality by making a test call as follows:

  1. In the lower-left corner of the Lync main window, click the audio device menu Select Audio Device .

  2. Click the Check Call Quality button to make a test call and hear how you sound when using the selected device.

While waiting for resolution on the microphone issue, enable call forwarding or simultaneous ring so that incoming calls get routed to another phone and don’t get missed. For the steps about how to set up call forwarding and simultaneous ring, see Call forward and simultaneous ring. If the problem persists, transfer the call to a landline. To transfer a call, in the Lync conversation window, click the Transfer button, and do one of the following:

  • Click one of your other numbers (such as your mobile phone number).

  • Click Another Person or Number, and in the dialog box that is displayed, type the phone number you want to transfer the call to, and then click OK.

Share Facebook Facebook Twitter Twitter Email Email

Was this information helpful?

Great! Any other feedback?

How can we improve it?

Thank you for your feedback!

×