In Excel 2010, improvements have been made to many of the functions that the Analysis ToolPak uses.
Read a blog post or try Office 365!
If you need to develop complex statistical or engineering analyses, you can save steps and time by using the Analysis ToolPak. You provide the data and parameters for each analysis, and the tool uses the appropriate statistical or engineering macro functions to calculate and display the results in an output table. Some tools generate charts in addition to output tables.
The Analysis ToolPak includes the tools described below. To access these tools, click Data Analysis in the Analysis group on the Data tab. If the Data Analysis command is not available, you need to load the Analysis ToolPak addin program.
Load the Analysis ToolPak

Click the Microsoft Office Button , and then click Excel Options.

Click Addins, and then in the Manage box, select Excel Addins.

Click Go.

In the AddIns available box, select the Analysis ToolPak check box, and then click OK.
Tip If Analysis ToolPak is not listed in the AddIns available box, click Browse to locate it.
If you are prompted that the Analysis ToolPak is not currently installed on your computer, click Yes to install it.
Note: To include Visual Basic for Application (VBA) functions for the Analysis ToolPak, you can load the Analysis ToolPak  VBA Addin the same way that you load the Analysis ToolPak. In the Addins available box, select the Analysis ToolPak  VBA check box.
For a description of each tool, click on a tool name in the following list.
Anova
The Anova analysis tools provide different types of variance analysis. The tool that you should use depends on the number of factors and the number of samples that you have from the populations that you want to test.
Anova: Single Factor
This tool performs a simple analysis of variance on data for two or more samples. The analysis provides a test of the hypothesis that each sample is drawn from the same underlying probability distribution against the alternative hypothesis that underlying probability distributions are not the same for all samples. If there are only two samples, you can use the worksheet function TTEST. With more than two samples, there is no convenient generalization of TTEST, and the Single Factor Anova model can be called upon instead.
Anova: TwoFactor with Replication
This analysis tool is useful when data can be classified along two different dimensions. For example, in an experiment to measure the height of plants, the plants may be given different brands of fertilizer (for example, A, B, C) and might also be kept at different temperatures (for example, low, high). For each of the six possible pairs of {fertilizer, temperature}, we have an equal number of observations of plant height. Using this Anova tool, we can test:

Whether the heights of plants for the different fertilizer brands are drawn from the same underlying population. Temperatures are ignored for this analysis.

Whether the heights of plants for the different temperature levels are drawn from the same underlying population. Fertilizer brands are ignored for this analysis.
Whether having accounted for the effects of differences between fertilizer brands found in the first bulleted point and differences in temperatures found in the second bulleted point, the six samples representing all pairs of {fertilizer, temperature} values are drawn from the same population. The alternative hypothesis is that there are effects due to specific {fertilizer, temperature} pairs over and above the differences that are based on fertilizer alone or on temperature alone.
Anova: TwoFactor Without Replication
This analysis tool is useful when data is classified on two different dimensions as in the TwoFactor case With Replication. However, for this tool it is assumed that there is only a single observation for each pair (for example, each {fertilizer, temperature} pair in the preceding example).
Correlation
The CORREL and PEARSON worksheet functions both calculate the correlation coefficient between two measurement variables when measurements on each variable are observed for each of N subjects. (Any missing observation for any subject causes that subject to be ignored in the analysis.) The Correlation analysis tool is particularly useful when there are more than two measurement variables for each of N subjects. It provides an output table, a correlation matrix, that shows the value of CORREL (or PEARSON) applied to each possible pair of measurement variables.
The correlation coefficient, like the covariance, is a measure of the extent to which two measurement variables "vary together." Unlike the covariance, the correlation coefficient is scaled so that its value is independent of the units in which the two measurement variables are expressed. (For example, if the two measurement variables are weight and height, the value of the correlation coefficient is unchanged if weight is converted from pounds to kilograms.) The value of any correlation coefficient must be between 1 and +1 inclusive.
You can use the correlation analysis tool to examine each pair of measurement variables to determine whether the two measurement variables tend to move together — that is, whether large values of one variable tend to be associated with large values of the other (positive correlation), whether small values of one variable tend to be associated with large values of the other (negative correlation), or whether values of both variables tend to be unrelated (correlation near 0 (zero)).
Covariance
The Correlation and Covariance tools can both be used in the same setting, when you have N different measurement variables observed on a set of individuals. The Correlation and Covariance tools each give an output table, a matrix, that shows the correlation coefficient or covariance, respectively, between each pair of measurement variables. The difference is that correlation coefficients are scaled to lie between 1 and +1 inclusive. Corresponding covariances are not scaled. Both the correlation coefficient and the covariance are measures of the extent to which two variables "vary together."
The Covariance tool computes the value of the worksheet function COVAR for each pair of measurement variables. (Direct use of COVAR rather than the Covariance tool is a reasonable alternative when there are only two measurement variables, that is, N=2.) The entry on the diagonal of the Covariance tool's output table in row i, column i is the covariance of the ith measurement variable with itself. This is just the population variance for that variable, as calculated by the worksheet function VARP.
You can use the Covariance tool to examine each pair of measurement variables to determine whether the two measurement variables tend to move together — that is, whether large values of one variable tend to be associated with large values of the other (positive covariance), whether small values of one variable tend to be associated with large values of the other (negative covariance), or whether values of both variables tend to be unrelated (covariance near 0 (zero)).
Descriptive Statistics
The Descriptive Statistics analysis tool generates a report of univariate statistics for data in the input range, providing information about the central tendency and variability of your data.
Exponential Smoothing
The Exponential Smoothing analysis tool predicts a value that is based on the forecast for the prior period, adjusted for the error in that prior forecast. The tool uses the smoothing constant a, the magnitude of which determines how strongly the forecasts respond to errors in the prior forecast.
Note: Values of 0.2 to 0.3 are reasonable smoothing constants. These values indicate that the current forecast should be adjusted 20 percent to 30 percent for error in the prior forecast. Larger constants yield a faster response but can produce erratic projections. Smaller constants can result in long lags for forecast values.
FTest TwoSample for Variances
The FTest TwoSample for Variances analysis tool performs a twosample Ftest to compare two population variances.
For example, you can use the FTest tool on samples of times in a swim meet for each of two teams. The tool provides the result of a test of the null hypothesis that these two samples come from distributions with equal variances, against the alternative that the variances are not equal in the underlying distributions.
The tool calculates the value f of an Fstatistic (or Fratio). A value of f close to 1 provides evidence that the underlying population variances are equal. In the output table, if f < 1 "P(F <= f) onetail" gives the probability of observing a value of the Fstatistic less than f when population variances are equal, and "F Critical onetail" gives the critical value less than 1 for the chosen significance level, Alpha. If f > 1, "P(F <= f) onetail" gives the probability of observing a value of the Fstatistic greater than f when population variances are equal, and "F Critical onetail" gives the critical value greater than 1 for Alpha.
Fourier Analysis
The Fourier Analysis tool solves problems in linear systems and analyzes periodic data by using the Fast Fourier Transform (FFT) method to transform data. This tool also supports inverse transformations, in which the inverse of transformed data returns the original data.
Histogram
The Histogram analysis tool calculates individual and cumulative frequencies for a cell range of data and data bins. This tool generates data for the number of occurrences of a value in a data set.
For example, in a class of 20 students, you can determine the distribution of scores in lettergrade categories. A histogram table presents the lettergrade boundaries and the number of scores between the lowest bound and the current bound. The single mostfrequent score is the mode of the data.
Moving Average
The Moving Average analysis tool projects values in the forecast period, based on the average value of the variable over a specific number of preceding periods. A moving average provides trend information that a simple average of all historical data would mask. Use this tool to forecast sales, inventory, or other trends. Each forecast value is based on the following formula.
where:

N is the number of prior periods to include in the moving average

Aj is the actual value at time j

Fj is the forecasted value at time j
Random Number Generation
The Random Number Generation analysis tool fills a range with independent random numbers that are drawn from one of several distributions. You can characterize the subjects in a population with a probability distribution. For example, you can use a normal distribution to characterize the population of individuals' heights, or you can use a Bernoulli distribution of two possible outcomes to characterize the population of coinflip results.
Rank and Percentile
The Rank and Percentile analysis tool produces a table that contains the ordinal and percentage rank of each value in a data set. You can analyze the relative standing of values in a data set. This tool uses the worksheet functions RANK and PERCENTRANK. RANK does not account for tied values. If you want to account for tied values, use the worksheet function RANK together with the correction factor that is suggested in the Help file for RANK.
Regression
The Regression analysis tool performs linear regression analysis by using the "least squares" method to fit a line through a set of observations. You can analyze how a single dependent variable is affected by the values of one or more independent variables. For example, you can analyze how an athlete's performance is affected by such factors as age, height, and weight. You can apportion shares in the performance measure to each of these three factors, based on a set of performance data, and then use the results to predict the performance of a new, untested athlete.
The Regression tool uses the worksheet function LINEST.
Sampling
The Sampling analysis tool creates a sample from a population by treating the input range as a population. When the population is too large to process or chart, you can use a representative sample. You can also create a sample that contains only the values from a particular part of a cycle if you believe that the input data is periodic. For example, if the input range contains quarterly sales figures, sampling with a periodic rate of four places the values from the same quarter in the output range.
tTest
The TwoSample tTest analysis tools test for equality of the population means that underlie each sample. The three tools employ different assumptions: that the population variances are equal, that the population variances are not equal, and that the two samples represent beforetreatment and aftertreatment observations on the same subjects.
For all three tools below, a tStatistic value, t, is computed and shown as "t Stat" in the output tables. Depending on the data, this value, t, can be negative or nonnegative. Under the assumption of equal underlying population means, if t < 0, "P(T <= t) onetail" gives the probability that a value of the tStatistic would be observed that is more negative than t. If t >=0, "P(T <= t) onetail" gives the probability that a value of the tStatistic would be observed that is more positive than t. "t Critical onetail" gives the cutoff value, so that the probability of observing a value of the tStatistic greater than or equal to "t Critical onetail" is Alpha.
"P(T <= t) twotail" gives the probability that a value of the tStatistic would be observed that is larger in absolute value than t. "P Critical twotail" gives the cutoff value, so that the probability of an observed tStatistic larger in absolute value than "P Critical twotail" is Alpha.
tTest: Paired Two Sample For Means
You can use a paired test when there is a natural pairing of observations in the samples, such as when a sample group is tested twice — before and after an experiment. This analysis tool and its formula perform a paired twosample Student's tTest to determine whether observations that are taken before a treatment and observations taken after a treatment are likely to have come from distributions with equal population means. This tTest form does not assume that the variances of both populations are equal.
Note: Among the results that are generated by this tool is pooled variance, an accumulated measure of the spread of data about the mean, which is derived from the following formula.
tTest: TwoSample Assuming Equal Variances
This analysis tool performs a twosample student's tTest. This tTest form assumes that the two data sets came from distributions with the same variances. It is referred to as a homoscedastic tTest. You can use this tTest to determine whether the two samples are likely to have come from distributions with equal population means.
tTest: TwoSample Assuming Unequal Variances
This analysis tool performs a twosample student's tTest. This tTest form assumes that the two data sets came from distributions with unequal variances. It is referred to as a heteroscedastic tTest. As with the preceding Equal Variances case, you can use this tTest to determine whether the two samples are likely to have come from distributions with equal population means. Use this test when there are distinct subjects in the two samples. Use the Paired test, described in the follow example, when there is a single set of subjects and the two samples represent measurements for each subject before and after a treatment.
The following formula is used to determine the statistic value t.
The following formula is used to calculate the degrees of freedom, df. Because the result of the calculation is usually not an integer, the value of df is rounded to the nearest integer to obtain a critical value from the t table. The Excel worksheet function TTEST uses the calculated df value without rounding, because it is possible to compute a value for TTEST with a noninteger df. Because of these different approaches to determining the degrees of freedom, the results of TTEST and this tTest tool will differ in the Unequal Variances case.
zTest
The zTest: Two Sample for Means analysis tool performs a two sample zTest for means with known variances. This tool is used to test the null hypothesis that there is no difference between two population means against either onesided or twosided alternative hypotheses. If variances are not known, the worksheet function ZTEST should be used instead.
When you use the zTest tool, be careful to understand the output. "P(Z <= z) onetail" is really P(Z >= ABS(z)), the probability of a zvalue further from 0 in the same direction as the observed z value when there is no difference between the population means. "P(Z <= z) twotail" is really P(Z >= ABS(z) or Z <= ABS(z)), the probability of a zvalue further from 0 in either direction than the observed zvalue when there is no difference between the population means. The twotailed result is just the onetailed result multiplied by 2. The zTest tool can also be used for the case where the null hypothesis is that there is a specific nonzero value for the difference between the two population means. For example, you can use this test to determine differences between the performances of two car models.
Notes:

The data analysis functions can be used on only one worksheet at a time. When you perform data analysis on grouped worksheets, results will appear on the first worksheet and empty formatted tables will appear on the remaining worksheets. To perform data analysis on the remainder of the worksheets, recalculate the analysis tool for each worksheet.
Do you have a specific function question?
Help us improve Excel
Do you have suggestions about how we can improve the next version of Excel? If so, please check out the topics at Excel User Voice