Convert Exchange 2003 mailboxes to mail-enabled users

After you have completed a staged migration, convert the mailboxes to mail-enabled users so that the mailboxes can automatically connect to the cloud mailbox.

Why convert mailboxes to mail-enabled users?

If you’ve completed a staged Exchange migration to migrate your organization’s Exchange 2003 on-premises mailboxes to Office 365 and you want to manage cloud-based users from your on-premises organization—using Active Directory—you should convert the on-premises mailboxes to mail-enabled users (MEUs).

This article includes a Windows PowerShell script that collects information from the cloud-based mailboxes and a Visual Basic (VB) script that you can run to convert Exchange 2003 mailboxes to MEUs. When you run this script, the proxy addresses from the cloud-based mailbox are copied to the MEU, which resides in Active Directory. Also, the properties of the MEU enable the Microsoft Online Services Directory Synchronization tool (DirSync) to match the MEU with its corresponding cloud mailbox

It’s recommended that you convert on-premises mailboxes to MEUs for a migration batch. After a staged Exchange migration batch is finished and you have verified that all mailboxes in the batch are successfully migrated and the initial synchronization of mailbox items to the cloud is complete, convert the mailboxes in the migration batch to MEUs.

PowerShell script to collect data from cloud mailboxes

You can use the scripts below to collect information about the cloud-based mailboxes, and to convert the Exchange 2007 mailboxes to MEUs.

The following script collects information from your cloud mailboxes and saves it to a CSV file. Run this script first.

Copy the script below to a .txt file and then save the file and save it as ExportO365UserInfo.ps1.

Param($migrationCSVFileName = "migration.csv")
function O365Logon
#Check for current open O365 sessions and allow the admin to either use the existing session or create a new one
$session = Get-PSSession | ?{$_.ConfigurationName -eq 'Microsoft.Exchange'}
if($session -ne $null)
$a = Read-Host "An open session to Office 365 already exists. Do you want to use this session? Enter y to use the open session, anything else to close and open a fresh session."
if($a.ToLower() -eq 'y')
Write-Host "Using existing Office 365 Powershell Session." -ForeGroundColor Green
$session | Remove-PSSession
Write-Host "Please enter your Office 365 credentials" -ForeGroundColor Green
$cred = Get-Credential
$s = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri -Credential $cred -Authentication Basic -AllowRedirection
$importresults = Import-PSSession $s

function Main

#Verify the migration CSV file exists
if(!(Test-Path $migrationCSVFileName))
Write-Host "File $migrationCSVFileName does not exist." -ForegroundColor Red

#Import user list from migration.csv file
$MigrationCSV = Import-Csv $migrationCSVFileName

#Get mailbox list based on email addresses from CSV file
$MailBoxList = $MigrationCSV | %{$_.EmailAddress} | Get-Mailbox
$Users = @()

#Get LegacyDN, Tenant, and On-Premise Email addresses for the users
foreach($user in $MailBoxList)
$UserInfo = New-Object System.Object

$CloudEmailAddress = $user.EmailAddresses | ?{($_ -match 'onmicrosoft') -and ($_ -cmatch 'smtp:')}
if ($CloudEmailAddress.Count -gt 1)
$CloudEmailAddress = $CloudEmailAddress[0].ToString().ToLower().Replace('smtp:', '')
Write-Host "$user returned more than one cloud email address. Using $CloudEmailAddress" -ForegroundColor Yellow
$CloudEmailAddress = $CloudEmailAddress.ToString().ToLower().Replace('smtp:', '')

$UserInfo | Add-Member -Type NoteProperty -Name LegacyExchangeDN -Value $user.LegacyExchangeDN
$UserInfo | Add-Member -Type NoteProperty -Name CloudEmailAddress -Value $CloudEmailAddress
$UserInfo | Add-Member -Type NoteProperty -Name OnPremiseEmailAddress -Value $user.PrimarySMTPAddress.ToString()

$Users += $UserInfo

#Check for existing csv file and overwrite if needed
if(Test-Path ".\cloud.csv")
$delete = Read-Host "The file cloud.csv already exists in the current directory. Do you want to delete it? Enter y to delete, anything else to exit this script."
if($delete.ToString().ToLower() -eq 'y')
Write-Host "Deleting existing cloud.csv file" -ForeGroundColor Red
Remove-Item ".\cloud.csv"
Write-Host "Will NOT delete current cloud.csv file. Exiting script." -ForeGroundColor Green
$Users | Export-CSV -Path ".\cloud.csv" -notype
(Get-Content ".\cloud.csv") | %{$_ -replace '"', ''} | Set-Content ".\cloud.csv" -Encoding Unicode
Write-Host "CSV File Successfully Exported to cloud.csv" -ForeGroundColor Green



The following Visual Bsic script converts on-premises Exchange 2003 mailboxes to MEUs. Run this script after you have ran the script to collect information from the cloud mailboxes.

Copy the script below to a .txt file and then save the file as Exchange2003MBtoMEU.vbs.


Dim UserDN
Dim remoteSMTPAddress
Dim remoteLegacyDN
Dim domainController
Dim csvMode
csvMode = FALSE
Dim csvFileName
Dim lastADLookupFailed

Class UserInfo
public OnPremiseEmailAddress
public CloudEmailAddress
public CloudLegacyDN
public LegacyDN
public ProxyAddresses
public Mail
public MailboxGUID
public DistinguishedName

Public Sub Class_Initialize()
Set ProxyAddresses = CreateObject("Scripting.Dictionary")
End Sub
End Class

'Command Line Parameters
If WScript.Arguments.Count = 0 Then
'No parameters passed
WScript.Echo("No parameters were passed.")
ElseIf StrComp(WScript.Arguments(0), "-c", vbTextCompare) = 0 And WScript.Arguments.Count = 2 Then
WScript.Echo("Missing DC Name.")
ElseIf StrComp(WScript.Arguments(0), "-c", vbTextCompare) = 0 Then
'CSV Mode
csvFileName = WScript.Arguments(1)
domainController = WScript.Arguments(2)
csvMode = TRUE
WScript.Echo("CSV mode detected. Filename: " & WScript.Arguments(1) & vbCrLf)
ElseIf wscript.Arguments.Count <> 4 Then
'Invalid Arguments
WScript.Echo WScript.Arguments.Count
Call ShowHelp()
'Manual Mode
UserDN = wscript.Arguments(0)
remoteSMTPAddress = wscript.Arguments(1)
remoteLegacyDN = wscript.Arguments(2)
domainController = wscript.Arguments(3)
End If


'Main entry point
Sub Main

'Check for CSV Mode
If csvMode = TRUE Then
UserInfoArray = GetUserInfoFromCSVFile()
WScript.Echo "Manual Mode Detected" & vbCrLf
Set info = New UserInfo
info.CloudEmailAddress = remoteSMTPAddress
info.DistinguishedName = UserDN
info.CloudLegacyDN = remoteLegacyDN
End If

End Sub

'Process a single user (manual mode)
Sub ProcessSingleUser(ByRef UserInfo)

userADSIPath = "LDAP://" & domainController & "/" & UserInfo.DistinguishedName
WScript.Echo "Processing user " & userADSIPath
Set MyUser = GetObject(userADSIPath)
proxyCounter = 1
For Each address in MyUser.Get("proxyAddresses")
UserInfo.ProxyAddresses.Add proxyCounter, address
proxyCounter = proxyCounter + 1
UserInfo.OnPremiseEmailAddress = GetPrimarySMTPAddress(UserInfo.ProxyAddresses)
UserInfo.Mail = MyUser.Get("mail")
UserInfo.MailboxGUID = MyUser.Get("msExchMailboxGUID")
UserInfo.LegacyDN = MyUser.Get("legacyExchangeDN")

End Sub

'Populate user info from CSV data
Function GetUserInfoFromCSVFile()

CSVInfo = ReadCSVFile()
For i = 0 To (UBound(CSVInfo)-1)
lastADLookupFailed = false
Set info = New UserInfo
info.CloudLegacyDN = Split(CSVInfo(i+1), ",")(0)
info.CloudEmailAddress = Split(CSVInfo(i+1), ",")(1)
info.OnPremiseEmailAddress = Split(CSVInfo(i+1), ",")(2)
WScript.Echo "Processing user " & info.OnPremiseEmailAddress
WScript.Echo "Calling LookupADInformationFromSMTPAddress"
If lastADLookupFailed = false Then
WScript.Echo "Calling ProcessMailbox"
End If
set info = nothing

End Function

'Populate user info from AD
Sub LookupADInformationFromSMTPAddress(ByRef info)

'Lookup the rest of the info in AD using the SMTP address
Set objRootDSE = GetObject("LDAP://RootDSE")
strDomain = objRootDSE.Get("DefaultNamingContext")
Set objRootDSE = nothing
Set objConnection = CreateObject("ADODB.Connection")
objConnection.Provider = "ADsDSOObject"
objConnection.Open "Active Directory Provider"
Set objCommand = CreateObject("ADODB.Command")
BaseDN = "<LDAP://" & domainController & "/" & strDomain & ">"
adFilter = "(&(proxyAddresses=SMTP:" & info.OnPremiseEmailAddress & "))"
Attributes = "distinguishedName,msExchMailboxGUID,mail,proxyAddresses,legacyExchangeDN"
Query = BaseDN & ";" & adFilter & ";" & Attributes & ";subtree"
objCommand.CommandText = Query
Set objCommand.ActiveConnection = objConnection
On Error Resume Next
Set objRecordSet = objCommand.Execute

'Handle any errors that result from the query
If Err.Number <> 0 Then
WScript.Echo "Error encountered on query " & Query & ". Skipping user."
lastADLookupFailed = true
End If

'Handle zero or ambiguous search results
If objRecordSet.RecordCount = 0 Then
WScript.Echo "No users found for address " & info.OnPremiseEmailAddress
lastADLookupFailed = true
ElseIf objRecordSet.RecordCount > 1 Then
WScript.Echo "Ambiguous search results for email address " & info.OnPremiseEmailAddress
lastADLookupFailed = true
ElseIf Not objRecordSet.EOF Then
info.LegacyDN = objRecordSet.Fields("legacyExchangeDN").Value
info.Mail = objRecordSet.Fields("mail").Value
info.MailboxGUID = objRecordSet.Fields("msExchMailboxGUID").Value
proxyCounter = 1
For Each address in objRecordSet.Fields("proxyAddresses").Value
info.ProxyAddresses.Add proxyCounter, address
proxyCounter = proxyCounter + 1
info.DistinguishedName = objRecordSet.Fields("distinguishedName").Value
End If

objConnection = nothing
objCommand = nothing
objRecordSet = nothing
On Error Goto 0

End Sub

'Populate data from the CSV file
Function ReadCSVFile()

'Open file
Set objFS = CreateObject("Scripting.FileSystemObject")
Set objTextFile = objFS.OpenTextFile(csvFileName, 1, false, -1)

'Loop through each line, putting each line of the CSV file into an array to be returned to the caller
counter = 0
Dim CSVArray()
Do While NOT objTextFile.AtEndOfStream
ReDim Preserve CSVArray(counter)
CSVArray(counter) = objTextFile.ReadLine
counter = counter + 1

'Close and return
Set objTextFile = nothing
Set objFS = nothing
ReadCSVFile = CSVArray

End Function

'Process the migration
Sub ProcessMailbox(User)

'Get user properties
userADSIPath = "LDAP://" & domainController & "/" & User.DistinguishedName
Set MyUser = GetObject(userADSIPath)

'Add x.500 address to list of existing proxies
existingLegDnFound = FALSE
newLegDnFound = FALSE

'Loop through each address in User.ProxyAddresses
For i = 1 To User.ProxyAddresses.Count
If StrComp(address, "x500:" & User.LegacyDN, vbTextCompare) = 0 Then
WScript.Echo "x500 proxy " & User.LegacyDN & " already exists"
existingLegDNFound = true
End If
If StrComp(address, "x500:" & User.CloudLegacyDN, vbTextCompare) = 0 Then
WScript.Echo "x500 proxy " & User.CloudLegacyDN & " already exists"
newLegDnFound = true
End If

'Add existing leg DN to proxy list
If existingLegDnFound = FALSE Then
WScript.Echo "Adding existing legacy DN " & User.LegacyDN & " to proxy addresses"
User.ProxyAddresses.Add (User.ProxyAddresses.Count+1),("x500:" & User.LegacyDN)
End If

'Add new leg DN to proxy list
If newLegDnFound = FALSE Then
'Add new leg DN to proxy addresses
WScript.Echo "Adding new legacy DN " & User.CloudLegacyDN & " to existing proxy addresses"
User.ProxyAddresses.Add (User.ProxyAddresses.Count+1),("x500:" & User.CloudLegacyDN)
End If

'Dump out new list of addresses
WScript.Echo "Original proxy addresses updated count: " & User.ProxyAddresses.Count
For i = 1 to User.ProxyAddresses.Count
WScript.Echo " proxyAddress " & i & ": " & User.ProxyAddresses(i)

'Delete the Mailbox
WScript.Echo "Opening " & userADSIPath & " as CDOEXM::IMailboxStore object"
Set Mailbox = MyUser
Wscript.Echo "Deleting Mailbox"
On Error Resume Next

'Handle any errors deleting the mailbox
If Err.Number <> 0 Then
WScript.Echo "Error " & Err.number & ". Skipping User." & vbCrLf & "Description: " & Err.Description & vbCrLf
Exit Sub
End If
On Error Goto 0

'Save and continue
WScript.Echo "Saving Changes"
WScript.Echo "Refeshing ADSI Cache"
Set Mailbox = nothing

'Mail Enable the User
WScript.Echo "Opening " & userADSIPath & " as CDOEXM::IMailRecipient"
Set MailUser = MyUser
WScript.Echo "Mail Enabling user using targetAddress " & User.CloudEmailAddress
MailUser.MailEnable User.CloudEmailAddress
WScript.Echo "Disabling Recipient Update Service for user"
MyUser.PutEx ADS_PROPERTY_APPEND, "msExchPoliciesExcluded", Array("{26491CFC-9E50-4857-861B-0CB8DF22B5D7}")
WScript.Echo "Saving Changes"
WScript.Echo "Refreshing ADSI Cache"

'Add Legacy DN back on to the user
WScript.Echo "Writing legacyExchangeDN as " & User.LegacyDN
MyUser.Put "legacyExchangeDN", User.LegacyDN

'Add old proxies list back on to the MEU
WScript.Echo "Writing proxyAddresses back to the user"
For j=1 To User.ProxyAddresses.Count
MyUser.PutEx ADS_PROPERTY_APPEND, "proxyAddresses", Array(User.ProxyAddresses(j))

'Add mail attribute back on to the MEU
WScript.Echo "Writing mail attribute as " & User.Mail
MyUser.Put "mail", User.Mail

'Add msExchMailboxGUID back on to the MEU
WScript.Echo "Converting mailbox GUID to writable format"
Dim mbxGUIDByteArray
Call ConvertHexStringToByteArray(OctetToHexString(User.MailboxGUID), mbxGUIDByteArray)
WScript.Echo "Writing property msExchMailboxGUID to user object with value " & OctetToHexString(User.MailboxGUID)
MyUser.Put "msExchMailboxGUID", mbxGUIDByteArray

WScript.Echo "Saving Changes"
WScript.Echo "Migration Complete!" & vbCrLf

End Sub

'Returns the primary SMTP address of a user
Function GetPrimarySMTPAddress(Addresses)
For Each address in Addresses
If Left(address, 4) = "SMTP" Then GetPrimarySMTPAddress = address
End Function

'Converts Hex string to byte array for writing to AD
Sub ConvertHexStringToByteArray(ByVal strHexString, ByRef pByteArray)

Set FSO = CreateObject("Scripting.FileSystemObject")
Set Stream = CreateObject("ADODB.Stream")

Temp = FSO.GetTempName()
Set TS = FSO.CreateTextFile(Temp)

For i = 1 To (Len (strHexString) -1) Step 2
TS.Write Chr("&h" & Mid (strHexString, i, 2))


Stream.Type = 1
Stream.LoadFromFile Temp

pByteArray = Stream.Read

FSO.DeleteFile Temp

Set Stream = nothing
Set FSO = Nothing

End Sub

'Converts raw bytes from AD GUID to readable string
Function OctetToHexString (arrbytOctet)

OctetToHexStr = ""
For k = 1 To Lenb (arrbytOctet)
OctetToHexString = OctetToHexString & Right("0" & Hex(Ascb(Midb(arrbytOctet, k, 1))), 2)

End Function

Sub ShowHelp()

WScript.Echo("This script runs in two modes, CSV Mode and Manual Mode." & vbCrLf & "CSV Mode allows you to specify a CSV file from which to pull user names." & vbCrLf& "Manual mode allows you to run the script against a single user.")
WSCript.Echo("Both modes require you to specify the name of a DC to use in the local domain." & vbCrLf & "To run the script in CSV Mode, use the following syntax:")
WScript.Echo(" cscript Exchange2003MBtoMEU.vbs -c x:\csv\csvfilename.csv")
WScript.Echo("To run the script in Manual Mode, you must specify the users AD Distinguished Name, Remote SMTP Address, Remote Legacy Exchange DN, and Domain Controller Name.")
WSCript.Echo(" cscript Exchange2003MBtoMEU.vbs " & chr(34) & "CN=UserName,CN=Users,DC=domain,DC=com" & chr(34) & " " & chr(34) & "" & chr(34) & " " & chr(34) & "/o=Cloud Org/ou=Cloud Site/ou=Recipients/cn=CloudUser" &
chr(34) & "")

End Sub

What the scripts do?


This is a Windows PowerShell script that you run in your cloud based organization to collect information about the cloud mailboxes that you migrated during the staged Exchange migration. It uses a CSV file to scope the batch of users. It’s recommended that you use the same migration CSV file that you used to migrate a batch of users

When you run the ExportO365UserInfo script:

  • The following properties are collected from the cloud mailboxes for the users listed in the input CSV file:

    • Primary SMTP address

    • Primary SMTP address of the corresponding on-premises mailbox

    • Other proxy addresses for the cloud mailbox

    • LegacyExchangeDN

  • The collected properties are saved to a CSV file named Cloud.csv.


This a VB script that you run in your on-premises Exchange 2003 organization to convert mailboxes to MEUs. It uses the Cloud.csv file, which is output by the ExportO365UserInfo script.

When you run the Exchange2003MBtoMEU.vbs script, it does the following for each mailbox listed in input CSV file:

  • Collects information from the input CSV file and from the on-premises mailbox.

  • Creates a list of proxy addresses from the on-premises and cloud mailbox to add to the MEU.

  • Deletes the on-premises mailbox.

  • Creates a MEU and populates the following properties:

    • legacyExchangeDN - Value from the on-premises mailbox.

    • mail - The primary SMTP of the cloud mailbox.

    • msExchMailboxGuid - Value from the on-premises mailbox.

    • proxyAddresses - Values from both the on-premises mailbox and the cloud mailbox.

    • targetAddress - Read from the on-premises mailbox; the value is the primary SMTP of the cloud mailbox.

      Important: To enable off-boarding from Office 365 to Exchange 2003, you have to replace the value of msExchMailboxGuid on the MEU with the Guid from the cloud-based mailbox. To obtain the Guids for the mailboxes in your cloud organization and save them to a CSV file, run the following PowerShell command:

      Get-Mailbox | Select PrimarySmtpAddress, Guid | Export-csv -Path .\guid.csv

      This command extracts the primary SMTP address and Guid for all cloud mailboxes into the guid.csv file, and then saves this file to the current directory.

Instead of using the input CSV file to convert a batch of mailboxes, you can run the Exchange2003MBtoMEU.vbs script in manual mode to convert one mailbox at a time. To do this, you will need to provide the following input parameters:

  • The distinguished name (DN)of the on-premises mailbox.

  • The primary SMTP address of the cloud mailbox.

  • The Exchange Legacy DN for the cloud mailbox.

  • A domain controller name in your Exchange 2003 organization.

Steps to convert on-premises mailboxes to MEUs

  1. Run the ExportO365UserInfo in your cloud organization. Use the CSV file for the migration batch as the input file. The script creates a CSV file named Cloud.csv.

    .\ExportO365UserInfo.ps1 <CSV input file>

    For example:

    .\ExportO365UserInfo.ps1 .\MigrationBatch1.csv

    This example assumes that the script and input CSV file are located in the same directory.

  2. Copy Exchange2003MBtoMEU.vbs and Cloud.csv to the same directory in your on-premises organization.

  3. In your on-premises organization, run the following command:

    cscript Exchange2003MBtoMEU.vbs –c .\Cloud.csv <FQDN of on-premises domain controller>

    For example:

    cscript Exchange2003MBtoMEU.vbs –c .\Cloud.csv

    To run the script in manual mode, enter the following command. Use spaces between each value.

    cscript Exchange2003MBtoMEU.vbs “<DN of on-premises mailbox>” “
    <Primary SMTP of cloud mailbox>” “<ExchangeLegacyDN of cloud mailbox>”
    <FQDN of on-premises domain controller>

    For example:

    cscript Exchange2003MBtoMEU.vbs “CN=Ann Beebe,
    “” “/o=First Organization/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=d808d014cec5411ea6de1f70cc116e7b-annb”
  4. Verify that the new MEUs have been created. In Active Directory Users and Computers, do the following:

    1. Click Action > Find.

    2. Click the Exchange tab.

    3. Select Show only Exchange recipients, and then select Users with external email address.

    4. Click Find Now.

    The mailboxes that were converted to MEUs are listed under Search results.

  5. Use Active Directory Users and Computers, ADSI Edit, or Ldp.exe to verify that the following MEU properties are populated with the correct information.

    • legacyExchangeDN

    • mail

    • msExchMailboxGuid*

    • proxyAddresses

    • targetAddress

    * As previously explained, the Exchange2003MBtoMEU.vbs script retains the msExchMailboxGuid value from the on-premises mailbox. To enable off-boarding from Office 365 to Exchange 2003, you have to replace the value for the msExchMailboxGuid property on the MEU with the Guid from the cloud-based mailbox.

Share Facebook Facebook Twitter Twitter Email Email

Was this information helpful?

Great! Any other feedback?

How can we improve it?

Thank you for your feedback!