For static routes to function properly, the address of the next hop computer in the static route must be recognized by the pool as an authorized host. Use this dialog box to add an authorized host.
This is the address that servers in the pool use to identify the authorized host.
Click to enter the fully qualified domain name (FQDN) of the authorized host.
Note: Enter the FQDN of the authorized host if you configured a static route on the pool that specifies the next hop computer using its FQDN.
Click to enter the IP address of the authorized host. The IP address 0.0.0.0 is not allowed. Multicast addresses ranging from 18.104.22.168 to 22.214.171.124 are also not allowed. All other IP addresses are allowed.
Note: Enter the IP address of the authorized host if you configured a static route on the pool that specifies the next hop computer using its IP address.
These settings are applied to connections made from servers in the pool to the authorized host.
When selected, this setting specifies that the authorized host cannot open a connection to the servers in this pool. When cleared, this setting specifies that the authorized host can open connections to the servers in this pool.
Note: This setting is only used in conjunction with static routes.
Throttle As Server
When selected, this setting specifies that greater throughput to the authorized host is enabled than is allowed when connecting to a client computer. When cleared, this setting specifies that greater restrictions are imposed on connections made from servers in this pool to the authorized host.
Treat As Authenticated
When selected, this setting specifies that clients that are connected to the authorized host are considered to have already been authenticated and are therefore not challenged by the servers in the pool.
Learn More Online
Click to expand or collapse
When you add an authorized host that is treated as authenticated, you should mitigate the risks by implementing additional security measures, such as a firewall or IPsec, around the authorized host.