A beginner's guide to Visio 2007

Don't let your first glance fool you. Microsoft Office Visio 2007 is a lot easier to use than it looks. To get started, all you need to know are a few basic steps and terms. Before long, you'll be able to go from a blank page to a drawing that makes your point and looks great.

One blank Visio flowchart and one completed Visio flowchart.

In this article

What is Visio for?

Create a drawing in 3 basic steps

Exactly what are Visio shapes, stencils, and templates?

What's next?

What is Visio for?

People use Visio to create a great variety of drawings, ranging from network diagrams to calendars, and from office layouts to flowcharts. To find out about the many kinds of drawings that Visio can help you make, see How can I tell what each Visio template is for?

Examples of Visio templates

Top of Page

Create a drawing in 3 basic steps

There are many kinds of Visio drawings, but you can use the same three basic steps to create nearly all of them:

  1. Choose and open a template.

  2. Drag and connect shapes.

  3. Add text to shapes.

    The following steps show how to create a basic flowchart.

Step 1: Choose and open a template

  1. Start Visio 2007.

  2. In the Template Categories list, click Flowchart.

  3. In the Flowchart window, under Featured Templates, double-click Basic Flowchart.

The Getting Started window shoing how to open the Basic Flowchart template

When you open a template, the shapes you need open with it, in collections called stencils. The stencils that open with the Basic Flowchart template are called Arrow Shapes, Backgrounds, and Basic Flowchart Shapes.

The stencils that open with the Basic Flowchart template are Arrow Shapes, Backgrounds, and Basic Flowchart Shapes

Step 2: Drag and connect shapes

To create your drawing, all you need to do is drag shapes from stencils onto the blank drawing page and connect them to one another. There are many ways to connect shapes, but for now let's use the fastest — drag the shapes on top of each other to connect them automatically by using AutoConnect. For more information, see Add and glue connectors with AutoConnect.

  1. Drag your first shape from the Basic Flowchart Shapes stencil onto the drawing page, and then release the mouse button.

    Drag a Decision shape from the Basic Flowchart Shapes stencil to the drawing page

  2. Drag your second shape on top of the first so that the blue arrows show, but don't release the mouse button yet.

    Drag a Data shape from the Basic Flowhcart Shapes stencil onto the Decision shape.

  3. While holding the mouse button, move your pointer on top of the blue arrow that points toward where you want to place the second shape.

    The pointer moves over the Decision shape to highlight the blue arrow in the direction where the Data Shape goes.

  4. Now release the mouse button. Your shapes are connected, and the first shape points to the second shape.

    The Decision shape is connected to the Data shape with an arrow pointing toward the Data shape.

  5. Continue to build your drawing by repeating steps 2-4.

Step 3: Add text to shapes

Although some drawings make a point all by themselves, it's often helpful and sometimes necessary to add text to the shapes. There are many ways to add text to shapes, but for now let's use the simplest way. If you want to learn more ways to add text to shapes, see Add data to shapes and Add imported data to shapes.

Add text directly to a shape

  1. Double-click the shape.

    When the Decision shape has been double-clicked the text box becomes active

  2. Start typing.

    Once the text box is active you can start typing.

  3. When you finish typing, click on a blank area of the drawing page.

    The text shows on the shape after the shape is no longer selected.

Top of Page

Exactly what are Visio shapes, stencils, and templates?

We already talked about these a little bit, but knowing more about Visio shapes, stencils, and templates can make Visio much easier to use.


Visio shapes are ready-made images that you drag onto your drawing page — they are the building blocks of your drawing.

When you drag a shape from a stencil onto your drawing page, the original shape remains on the stencil. That original is called a master shape. The shape that you put on your drawing is a copy — also called an instance — of that master. From most Visio stencils, you can drag as many instances of the same shape onto your drawing as you want.

The manufacturing shape is dragged from the Department stenicl to the drawing page.

There are many ways to use and customize Visio shapes, but you can accomplish a lot with only the most popular methods and a few special features.

Customize shapes on the spot

There are thousands of Visio shapes and countless ways to use and customize them. The most common things that people do with shapes involve features that are built right into the shapes. Visual cues help you find and use those features quickly.

A selected shape shows green roation and selection handles and blue connection arrows.

1. Rotation handles

The bright green dots located above shapes are called rotation handles. Drag a rotation handle right or left to rotate the shape.

2. Blue connection arrows for AutoConnect

The light blue connection arrows help you easily connect shapes to one another, as you saw in the previous section, Create a drawing in three basic steps. However, there is more than one way to use AutoConnect, so for more information, see Add and glue connectors with AutoConnect.

3. Selection handles for resizing shapes

You can use the bright green selection handles to change the height and width of your shape. Click and drag a selection handle on the corner of a shape to enlarge the shape without changing its proportions, or click and drag a selection handle on the side of a shape to make the shape taller or wider.

Special features of Visio shapes

Visio shapes are much more than simple images or symbols.

Shapes can hold data

Each shape can be associated with data. There are a number of ways you can add data to shapes. For more information, see Add data to shapes and Add imported data to shapes. For now, let's just see how to view or display the data after it is added.

After data is added to a shape, it isn't displayed in the drawing by default. The easiest way to see the data is to select the shape and then open the Shape Data window, as shown in the illustration below.

The Shape Data window shows the data for a selected shape.

If you want to display the data for lots of shapes at once, you can use a feature called Data Graphics. The following illustration shows the data for two trees at once. For more information about using Data Graphics, see Enhance your data with data graphics.

Data graphics shows the data for two shapes at one time.

Note: Data Graphics is only available in Microsoft Office Visio Professional 2007.

Shapes with special behavior

Too many Visio shapes have special behavior to list them all, but here are a couple of examples.

For example, you can stretch a People shape to show more people, or stretch the Growing flower shape to indicate growth.

People shape displays up to four people if stretched horizontally   Growing flower shape grows taller if stretched vertically

The next illustration shows how you can measure the size of a shape on your page by using a special dimension shape that is designed for measuring other shapes. (The dimension shapes are only available in Office Visio Professional 2007.)

The Horizontal shape from the Dimensioning stenicl shows the size of a shape on the drawing page.

And below is a Pie chart shape from the Charting Shapes stencil. You can right-click the shape to set the number of slices and what percent each slice represents.

Pie chart

Tip: A great way to find out what a shape can do is to right-click it to see if there are any special commands on its shortcut menu.


Visio stencils hold collections of shapes. The shapes in each stencil have something in common. The shapes can be a collection of shapes that you need to create a particular kind of diagram, or several different versions of the same shape.

In the following illustration, the Basic Flowchart Shapes stencil contains common flowchart shapes, and the Backgrounds stencil contains a variety of backgrounds. You can even create your own stencil of favorite shapes. For information about creating your own stencil, see Create a new stencil.

Stencils stacked on the Shapes window can be re-ordered to see each stencil in turn

1. Stencils appear in the Shapes window.

2. When stencils open, they automatically dock themselves in the Shapes window, one on top of another.

3. Click the title bar of a stencil to bring it to the top of the stack.

4. The stencil that was previously on top of the stack moves to the bottom of the Shapes window.

Open any Visio stencil

Each template opens with the stencils that you need to create a particular kind of drawing, but it's nice to know that you can open other stencils any time you want.

  1. On the File menu, point to Shapes, point to the category that you want, and then click the name of the stencil that you want to use.

  2. Repeat step 1 for any other stencils that you want to open.

    stencils opened from the file menu.


Visio templates are a little harder to describe because they aren't a single thing — they are more like a collection of settings. A Visio template combines a blank drawing page with any combination of the following:

Stencils full of the shapes that are needed to create a particular kind of drawing      The Charts and Graphs template, for example, opens with a stencil full of quick, easy shapes for creating charts and graphs.

The Charting Shapes stencil opens with many shapes you can use to create simple graphs and charts.

Appropriate grid size and ruler measurements    Some drawings require a special scale. For example, the Site Plan template opens with an engineering scale, where 1 inch equals 1 foot.

The Site Plan template opens with a special engineering scale.

Special menus    Some templates have unique features that you can find on special menus. For example, when you open the Calendar template, a Calendar menu appears on the main menu bar. You can use the Calendar menu to configure your calendar or to import data from Microsoft Office Outlook into your calendar.

The Calendar template opens with a special Calendar menu.

Wizards to help you with special types of drawings    In some cases when you open a Visio template, a wizard helps you get the drawing off to a good start. For example, the Space Plan template opens with a wizard that helps you set up your space and room information.

the space plan template opens with a wizard to help you get started.

Top of Page

What's next?

Here are some suggestions for how to get more familiar with Visio.

Get help creating a more complex drawing

You can use the steps in Create a drawing in 3 basic steps for many of the Visio templates. For the more complex templates, it's really helpful to read the article written for that specific template.

  1. On the Help menu in Visio, click Microsoft Office Visio Help.

    The Visio Help menu

  2. In the Help window, click the Show Table of Contents button.

    Clicking the book icon in the Visio Help window opens the Visio table of contents.

  3. In the Table of Contents window, click the category for the drawing that you want to create.

    The Visio TOC opened to the Create a brainstorming diagram help topic

    Tip: You can find all kinds of information in Visio Help if you take a few minutes to browse through it.

Discover the variety of Visio templates

Depending on the edition of Visio you use, you have between 25 (for Microsoft Office Visio Standard 2007) and 64 (for Office Visio Professional 2007) different templates to work with. To find out more about these templates, browse through the Getting Started screen, which opens automatically when you start Visio. Click the various categories, and then click the template thumbnails to see larger versions of the thumbnails and short descriptions of the templates.

The Getting Started window opened to show the networking templates.

Browse through the stencils

Taking a moment to open the list of stencils is a great way to get to know more about the huge variety of shapes available, but exploring a few of the stencils themselves is even better.

You don't even have to open a diagram — just click Shapes on the File menu, and then navigate down to the stencil that you want to open.

stencils opened from the file menu.

Browse through the menus

Opening menus is another quick way to get a sense of what you can do in Visio. The View, Data, and Shape menus are three of the most popular menus.

The View menu, the Data menu, and the Shape menu showing all of their commands.

1. The View menu lists all the special windows for Visio drawings as well as the commands for turning on and off the visual guides, like the drawing grid.

2. The Data menu lists the commands for advanced features, like importing and displaying data. These are some of the most powerful features available in Visio.

3. The Shape menu lists the commands that orient your shapes and connectors the way that you want them in your drawing.

Top of Page

Share Facebook Facebook Twitter Twitter Email Email

Was this information helpful?

Great! Any other feedback?

How can we improve it?

Thank you for your feedback!